Friday, January 23, 2015

Race Car Service and Repair Bay Area - 1967 Ferrari 275 GTB/4 - Zucchi Motorsports Sonoma - 707-334-3700




Posted by  on Wednesday, January 14, 2015 in ArticlesVehicle Spotlight
In late 1966, Ferrari used the Paris Motor Show to debut the latest development of its 275 GTB, the V-12 berlinetta that had been introduced to replace the long-running 250 series just two years earlier. With the addition of a second overhead camshaft to each cylinder bank, Ferrari squeezed one final iteration out of the venerable 60-degree, short-block Colombo motor that had powered the 250 and early 275 models, and in the process, they created the first dual overhead-cam engine ever used in a Ferrari road car. The new engine was equipped with six Weber carburetors, which was previously just an option on the single-cam motor, and its configuration distinguished itself by developing 20 horsepower more than the unit on which it was based.
1967 Ferrari 275 GTB/4 V-12 Engine
The newly christened 275 GTB/4, aptly named for its four-cam valve actuation, did not visually compromise any aspects of the prior 275 GTB’s beautiful Pininfarina body design, as it only added a sporty raised hood bulge to accommodate the revised engine’s additional hardware. The 275 GTB/4 is increasingly being deemed by many Ferrari collectors to be the best-looking performing variant of the late 1960s V-12 berlinetta, and its collectability is increased by the fact that it was produced in a sparing quantity of approximately 330 examples. The model’s rarity, ever-rewarding performance characteristics, and classic good looks have made it one of the most celebrated grand touring Ferraris of all time.
1967 Ferrari 275 GTB/4 Interior
For many cognoscenti, the Ferrari 275 was the best looking of all Ferrari GTs in berlinetta form, which is attested by a roll call of such celebrity owners as James Coburn, George Harrison, Steve McQueen,Miles Davis, Eric Clapton, Clint Eastwood, and Peter Sellers. In 1964, it boasted Ferrari’s first transaxle and all-round independent suspension, but after just a couple of years, it was majorly updated and uprated. Significant developments included not just the introduction of the smoother and more powerful dry-sump, four-cam engine but also a redesigned transaxle and steadying torque tube. With 300 brake horsepower at 8,000 rpm from the 3,286-cubic centimeter V-12, the 275 GTB/4 was capable of 0–60 mph in 5.5 seconds and a top speed of 163 mph.
1967 Ferrari GTB/4 Exterior
In all, fewer than 300 Ferrari 275 GTB/4s were built, and they could easily be identified by their longer boot hinges and longer nose, which was a feature that was introduced for the berlinettas in 1966 to prevent high-speed lift. These 275 GTB/4s remain as exotic and coveted today as they were in period.
1967 Ferrari 275 Tool Kit
source: http://www.heacockclassic.com/articles/1967-ferrari-275-gtb4/

No comments:

Post a Comment